With the help of mechanical and hydraulic CNC presses we can press and calibrate products of simple and complex shapes. For products which require high density we use procedures of double sintering or the procedure of copper infiltration. Sintering can be accomplished as the procedure of normal or high temperature sintering in ENDO or N2/H2 protective atmosphere.
The process of making sintered products is composed of the following production sub processes:
- The preparation of dust
According to the market needs we offer products made of different materials: iron, steel, low alloy steel, high alloy or stainless steel, bronze and soft magnetic composite materials.
- Pressing
The market demands for products which have specific geometric shapes and products of different sizes influenced our choice of presses. Our production line is based on presses which have the pressing force from 4 tons to 200 tons. The presses are either mechanical or hydraulic.
Video 1 (
mpg; 2,82 MB)
Video 2 ( mpg; 2,70 MB)
- Sintering
Sintering of products can be carried out on two furnaces which offer two different atmospheres ENDO or N2/H2. Sintering can be accomplished as the procedure of normal or high temperature sintering.
- Calibration
Calibration operations are performed on calibrated presses which have the pressing force from 15 tons to 200 tons.
Video ( mpg; 2,80 MB)
- Secondary processes
We also make products which are not always possible to be made by a standard process of making sintered products; therefore, we also use some additional procedures.
Our main production processes are supported by the following secondary processes:
